981 RBS 2016-01-18T17:26:14+00:00

BATTERY FABRICATION FLUX

Fry 981 RBS

Description
Fry 981 RBS battery fabrication flux allows the rapid evaporation needed in high volume cast-on-strap manufacturing. This solvent-based flux contains no chlorides or heavy metals to effect long term performance, and is environmentally safe. Another key advantage is the wide window of operation available with this flux. Whether running at low temperatures due to straps cracking, or high temperatures to accommodate large malss plates, the 981 RBS provides consistently strong bonds.

Uses
Fry 981 RBs provides consistent metallurgical fusing for all lead battery alloys and is especially effective in joining dissimilar alloys as in cast-on-strap manufacturing. Fry 981 RBS exhibits very low fuming or smoking, leaves minimal residues after fusing, and is not highly corrosive. Sound metallurgical bonding is provided with a porosity-free connection.

Benefits
Low fuming
Minimal residue
Not highly corrosive

Application
Fry 981 RBS can be applied by dipping, spraying, or brushing and will function in closed or open systems. It has a long working life in the fluxpot and, if necessary, may be thinned with RBS thinner.

Physical Data – Typical Values

Property 981 RBS Test Method
Specific Gravity @ 25oC 1.046 ASTM D 1298
Flash Point 85oF ASTM E 502
Odor Alcohol Fry CIP-002
Appearance Clear Fry CIP-002
Color Bright Yellow ASTM D 1554
Thinner RBS Thinner

Packaging
Fry 981 RBW flux is available in 1, 5, and 55 gallon containers.

Safety
Observe standard precautions for handling and use, such as operating in ventilated areas and avoiding prolonged or repeated contact with the skin. Consult the Material Safety Data Sheet for other pertinent information before using this product.

Pricing
For pricing and availability – Contact us

Important Notice to Purchaser
All statements, technical information and recommendations contained herein are believed to be reliable, but the accuracy or completeness thereof is not guaranteed.  In lieu of all warranties expressed or implied, seller’s and manufacturer’s only obligation shall be to replace such quantity of the products proved to be defective.  Neither the seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use or the inability to use the product.  User shall determine the suitability of the product for his intended use, and the user assumes all risk and liability whatsoever in connection therewith.  No statement or recommendation not contained herein shall have any force or effect unless by agreement in writing signed by officers of seller and manufacturer.